К вопросу о внутреннем триммере в фузах.
====================================
Dear Sir!
======blablabla pishu choto vejlivoe========
I have a question about Peppermint Fuzz.
There is internal "bias" control. How does it work?
I've heard that this knob adopt transistors for a high/low temperatures. (am I wrong?)
I don't understand this. O_o
How I can use this knob...? And how should I use this knob?
How it sounds?
Thanks.
With best regards, Andrew.
===========================================
Вот что отвечает.
hello Andrew,
Yes the internal trim pot needs to be set before you use the pedal, if you change
temperatures. There is a manual on my website MANUALS area that
will show you how to set it.
Have fun!
========================================================
вот что говорит мануал.
10. INTERNAL TRIM POT: This allows the best sounds at various temperatures. It is a blue square thing with white center. Use a tiny screwdriver to gently turn the white center part. Basic setting is with the arrow pointing top left (northwest) at cooler temps (60-70) or bottom left (southwest) at hotter temps (80s), looking inside with the battery at the bottom. You should set it by turning fuzz and vol knobs up all the way, and buzz knob down. Set the trimpot pointing down. Then without playing guitar, turn trimpot CW to find the spot where the ambient noise from the guitar comes through and is not gated. This setting changes depending on temps and buzz knob setting. Try various settings to get different sounds but the setting above is best.
==================================
Скажите что такое CW например?
и про какие температуры он говорит. Про температуры работы транзистора?
Размещение рекламы