==============
Pangaea_V2.5.7
==============

== Update instruction ==

1. Connect your Pangaea CP-100 device to computer an USB cable and choose the CP-100 mode  USB Drive.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
2*. Power on your CP-100 device by power supply.
3*. Save all content of CP-100 in some folder on your comp.
4*. Format CP-100
5*. Copy saved content to CP-100
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
6. Copy in the USB drive root folder the file  firmware (it is in the unzipped folder).
7. Safely unmount USB-drive and disconnect the USB cable.
8. Connect a power adapter to the CP-100.
9. The firmware update will be completed in some seconds, take a look to your CP-100 display.
9. The device is ready to use. Only now you can disconnected the power supply.
----------------------------------------------------
*Note: If you have a more new version than V1.0, you can skip steps 2,3,4 and 5
----------------------------------------------------
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\

==     CP-100 ==

1.  CP-100   USB         USB Drive.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
2*.     CP-100.
3*.    CP-100  -   .
4*.  CP-100
5*.     CP-100
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
6.         CP100  firmware.
7.   USB-Drive   USB .
8.     .
9.        : 
     ,    . 
----------------------------------------------------
   Pangaea   !!!
----------------------------------------------------
9.    .        CP-100.

*:        V1.0,     2, 3, 4  5. 

