Помогите решить проблему
При включении ASIO драйверов в аудио настройках Sonar 8
Драйвера Audiophile2496 почему-то серые недоступные для работы галочки поставить не возможно хотя в списке они есть, а драйвера Audigy ZZ доступны
Делаю по инструкции
M-Audio Audio Interface setup for Cakewalk software
Click Options | Audio | Advanced. Set your Driver Mode to ASIO. If you do not see Driver Mode, make sure the box next to “Always use mme interface” is NOT checked. Click OK and restart the program.
Next, Click Options | Audio:
On the Drivers tab:
Make sure your M-Audio card is selected under both inputs and outputs. If it appears grayed out, deselect all drivers, in both inputs and outputs, then select your M-Audio card. If changes are made, click OK and restart the program.
NOTE: M-Audio also provides very reliable WDM drivers. If you experience problems in ASIO Driver Mode, you may want to consider using WDM as an alternative.
On the general tab:
Make sure one of your M-Audio card drivers is selected as Playback Timing master. Click OK. Restart the program if prompted.
Finally, all audio playback will occur from the M-Audio device itself. Make sure you have your speakers or headphones connected to its outputs.
Размещение рекламы